Oven High Severity
F62 Appliance Error Code

Thermador Oven F62 Error: Lower Oven Over-Temp in Clean

Thermador oven F62 error indicates lower oven over-temp in clean. Stop using the appliance and call a Thermador-certified technician immediately for diagnosis. What Does Thermador Oven Error Code F62 Mean? The F62 error code on a Thermador Professional or Masterpiece double wall oven indicates the lower oven cavity exceeded safe temperature during a self-clean cycle. […]

Quick Assessment

Answer to continue safely

Is it safe to keep using?

No. Do not run another self-clean cycle on the lower oven until the cause is fixed. The upper oven on double wall oven models remains safe to use for normal cooking.

Can I reset the code?

No. A reset clears the display once the lower cavity has cooled, but the underlying hardware fault remains. The next self-clean attempt repeats the over-temperature condition.

When to stop immediately?

Stop if you notice: F62 reproduces on every lower oven self-clean attempt, Visible heat damage to the lower cavity gasket or liner.

Symptoms You May Notice

Lower oven self-clean aborts within the first hour

The clean program starts normally on the lower cavity but cancels with F62 well before the high-heat phase completes.

Lower oven door remains locked after the abort

The latch will not release until the cavity drops below 200°F, often taking 90 to 120 minutes.

Upper oven continues to function normally

On a double wall oven, F62 affects only the lower cavity — the upper oven still cooks normally.

Possible Causes

1

Welded lower oven clean relay

The relay that powers the lower oven broil element during self-clean has fused closed, allowing unlimited heat input.

Requires Professional
2

Drifted lower oven RTD sensor

The lower cavity temperature sensor is reading falsely low, causing the control to add heat past the safe maximum.

Requires Professional
3

Solder joint failure on the relay control board

A solder joint near the lower oven relay has cracked, causing intermittent contact and false temperature readings.

Requires Professional

Safe Checks You Can Do

These checks are safe for homeowners. No disassembly required. Do not remove panels or access internal components.
  1. 1

    Wait for the lower door to unlock

    Do not try to force the lower oven door. Wait for the cavity to cool below 200°F, which takes 90 to 120 minutes after F62 appears.

    Forcing the door can damage the latch mechanism and turn a $300 repair into a $700 repair.

  2. 2

    Use the upper oven for any urgent cooking

    On Thermador double wall ovens, the upper oven typically remains fully functional after F62 affects only the lower cavity.

    You can verify the upper oven still works by starting a low-temperature bake while the lower oven cools.

When to Call a Professional

Contact a qualified technician if:

  • Lower oven exceeds setpoint by more than 50°F
  • F62 appears immediately after every lower oven self-clean attempt
  • Visible scorch marks on the lower oven cavity

Need Professional Help?

Find qualified technicians in your area for proper diagnostics and repair.

Oven Repair Service Schedule Appointment